Dongfeng 4*2 Multifunctional Cleaning Sewage Suction Truck Sewer Jet Truck 10 Cubic Meters
Adopt the mature products of Dongfeng Dollyka second-class chassis EQ1125SJBCDC series, reliable quality, single row nationwide warranty, luxury cab that can be turned forward, brand-new humanized interior, Chaochai 170/Yucai 165 horsepower, double-layer girder, wheelbase 3800mm, original direction assist, with ABS, original air-conditioning, electric glass, central locking, reversing image, and others according to the factory standard of Dongfeng Company.
1. For the model, the water tanks on both sides are lifted together on the sewage tank. The tank body is made of 6mm carbon steel plate, and the water tanks on both sides are made of 4mm carbon steel. (Optional integrated water and sewage tank)
2. High-pressure part: German Pinfu high-pressure pump, 215 flow, 24mpa pressure (installed with a set of winter air blowing device), the water outlet pipe of the box is installed with a 65 filter and a Y-type filter. It is equipped with a 60-meter high-pressure pipe with an inner diameter of 19mm. It is equipped with a 180-degree rotating reel, with a shower tube device. The reel is placed on the rear head and four sets of manual locking bolts are added. The back cover can be opened hydraulically. Standard 10 combination nozzles (one optional mine nozzle + one Rambo nozzle)
3. Pollution suction part: Install Shandong Zibo SK-12 water circulation pump (mechanical seal), and the outlet pipeline of the anti-overflow valve has a three-way filter. The rear cover is equipped with a 150MM ball valve drain port and a 100MM ball valve suction port (the inlet is inclined at 45 degrees, and an internal extension tube rises to the top of the tank). A 100MM suction port on the right side of the waist is linked to the top of the Guan lift.
4. Detailed requirements: A. The two warehouses are interoperable, with a filter in the middle. Make guardrails and ladders on the top of the water tank. B. Two flashes are installed at the rear of the tank. C. Make a toolbox on the left and right sides of the rear of the tank, and install all the high-voltage switches inside the right side. The license plate must be able to hang behind the toolbox. With hand washing device. D. One wave release board inside the sewage tank and two wave release boards inside the water tank. E. The two sides of the cleaning box are equipped with a drain at the lowest position, with an elbow.
Main performance of cleaning sewage suction truck:
Power take-off: PTO power take-off is used to take power from the chassis engine and deliver it to the vacuum pump and high-pressure pump respectively. It is a key technology to realize multi-point high-power power take-off
Vacuum pump: ultimate vacuum degree: -0.093MPA, maximum pumping capacity: 360m3/h. Maximum working speed: 1460r/min. Water ring vacuum pump, Siemens technology, domestic production.
High-pressure water pump: rated pressure: 24MPa, rated flow: 215L/min.
Sewage tank: 7 cubic meters in volume, made of 6 mm high-quality carbon steel, cylindrical, the tank body can be hydraulically lifted and self-unloaded, and the back cover can be opened with double tops.
Clean water tank: 3 cubic meters in volume, composed of 2 interconnected water tanks, with built-in anti-surge board volume.
Nozzle: standard configuration 10 nozzles + mine + Rambo
Dredging pipe: domestically made high-quality special dredging pipe with inner diameter of 19 mm, high pressure resistance, light weight, low friction resistance, and strong scratch resistance. Standard configuration tube length: 60 meters.
Special suction pipe: soft and wear-resistant, with an inner diameter of 100 mm and a length of 8 meters.
Hydraulic reel: hydraulic drive, forward and reverse, stepless speed regulation. Installed on the back cover of the sewage tank, it can be wound and stored with a special hose with an inner diameter of 19 mm not less than 60 meters.
|Contact Person :||Ms. Tracy|